©

Precision Micro, Birmingham

Precision Micro, Birmingham

Birmingham United Kingdom Precision Micro Epoxy BS3000 SG Epoxy ST100 Epoxy MT100 Epoxy Flex PH PUR Top M+

Precision micro, a UK based manufacturer of precision metal components for the automotive, aerospace and pharmaceutical industries were investing in a refurbishment of their photochemical etching facilities. The state of the art facility required a highly chemically resistant easy to clean floor finish. Various existing substrates needed to be pulled together to create one seamless finish with an integrated cove. Due to the chemicals utilised in the area, there is a risk of airborne corrosives attacking the metal ceilings, so an acid resistant protective coating was also required overhead.

Reference identification data
Construction project:
Floor coating - industrial systems
Building type:
Industrial buildings / halls
Short description
After extensive trials and chemical exposure testing, Remmers resin systems were selected for the works. For the ceiling, Epoxy BS3000 SG provided chemical protection to the galvanised steel surface and exhibited excellent adhesive properties after the steel was prepared using an ice blasting process. The floors were a mixture of existing resin finishes, new concrete and Polypropylene drain covers. A selection of priming solutions for the different areas were utilised including, Epoxy ST100, Epoxy MT100 and Epoxy BS3000 SG. Then topped with Epoxy Flex PH laid at 2mm and sealed with PUR Top M+. Integral coved skirting was installed to all perimeters, 100mm high.
Client:
Impact Flooring
Contractor:
Precision Micro
Site address:
B24 9GZ Birmingham
Date / completion:
2021
Can the work be viewed?
No

Sample of products or systems used

Additional links

https://www.precisionmicro.com/

Download

Download reference as PDF

Show all

Further references

Brandenburg Gate, Berlin

Berlin

The structure showed cracks in some places, for which there were different causes. Improved statics and higher load capacity were achieved by stiffening the structures, frictional connection of the disturbed foundation and decoupling the components gate, passage hall and gate houses components. Particularly on the western side, intense blackening of the rock surface had built up, which was strongly interlocked with the ground. The deposits were composed of a mixture of soot and plaster. The cleaning process carried out in 1990 with the help of water could only result in a superficial cleaning. In 2002, the newly developed method of particle beam cleaning and cleaning by laser made it possible to remove soot and plaster without destroying the original surface.
Continue reading

Elbe Philharmonic Hall, Hamburg

Hamburg

On the façade surfaces of Kaispeicher A, there was a lot of efflorescence and lime aging, both signs of penetrating moisture. The damage patterns indicated a lack of frost resistance as well as no protection against driving rain. The listed façade required extensive frost and moisture protection, but was not allowed to undergo any visual changes.
Continue reading