Arte Mundit ECO

The substrate being cleaned must be dry and free from dust and loose debris.

Use a suitable tool to coarsely clean off the substrate.

Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.

Set up a trial area to determine the cleaning effect.

Temperature of the material, air and substrate: from min. +5 °C to max. +30 °C

Stir the material thoroughly using a suitable tool.

Apply with suitables tools to the full substrate area.

Apply material over the entire surface manually or by airless spraying.

Fill undercut areas and contours thoroughly with the material.

After 24 hours and once completely dry, remove the film by pulling it off, keeping the tensile force as constant as possible.

Cleaned surfaces can be further cleaned with a damp sponge or medium-hard brush (nylon bristles).

Use as little water as possible.

When using this product in the exterior, the surface to be cleaned must be protected against weather conditions.

Please contact Remmers Technical Service (phone +49 5432 83900) before applying with machine processing.

Brush, lamb's wool roller, spreader, smoothing trowel, airless spraying equipment
Stainless steel or plastic tools are recommended.

Clean tools immediately after use with water and detergent.

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

Approx. 1.0 kg/m² on flat surfaces
Approx. 1.0 – 3.0 kg/m² on highly textured surfaces

Apply to a large enough trial area to determine the precise amount required.

The relevant test certificates must be observed when planning and carrying out work.

Always set up a trial area/trial areas first.

Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

Any material that is contaminated after application must be disposed of in accordance with the applicable regulations.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.