Window Care Kit

Shake well before use.

Wear gloves (nitrile rubber).

Soak a cotton cloth with the cleaner and clean the surface; do not rub painted surfaces too intensively.

Leave to dry for approx. 30 minutes.

Using the second special cloth, apply a thin(!) layer of balm quickly, evenly and in one direction (left to right or top to bottom).

Do not buff or rub.

Protect freshly treated surfaces from driving rain, wind, sunlight and condensation.

Do not use on areas directly exposed to sunlight or on heated surfaces.

Do not use at temperatures below 15 °C.

Please only use the special cloths enclosed.

Any material that is not made of wood (e.g. covers, glass, door handles) must not come into contact with the cleaning product. If contact does occur, the material should be rinsed carefully with water.

Approx. 30 minutes

Practice values at +20 °C and 65% relative humidity.

The coating may take significantly longer to dry thoroughly in lower temperatures, at high humidity or if the maximum layer thickness has been exceeded.

Ready to use

Store unopened original containers in a cool, dry place protected from frost, use containers promptly within one season after purchase.

5-10 ml/m² per coat

Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.

For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.