Article No. 647605
Semi-scumbling, "true" silicone resin paint
Product specifications
Once fully cured
(DIN 52617) w < 0.1 kg/(m² ∙ h0.5)
(DIN 52615) sd < 0.10 m
The stated values represent typical product characteristics and are not to be construed as binding product specifications.
Field of application
- Porous, mineral building materials
- Historically valuable and protected monuments
Properties
- Semi-scumbling
- Highly water vapour permeable sd ≤ 0.1 m
- Highly water-repelling w ≤ 0.1 kg/(m² ∙ h0.5)
- Reversible
- Low-stress
- Matt, mineral character
- Lime paint look
-
Preparation
-
Substrate requirements
Dry, clean, free of dust and cracks and capable of supporting a load.
Free of salts known to be damaging to building materials.
-
Preparations
Use Primer Hydro HF to prime any sanding, firmly adhering substrates.
If necessary, strengthen or consolidate the substrate using silicic acid ester (KSE) products (see also guidelines for KSE modular system).
-
-
Application
-
Application requirements
Temperature of the material, air and substrate: from min. +5 °C to max. +25 °C
-
Stir well.
Coat the surface using a suitable tool.
Depending on the conditions of the substrate, apply 1 or 2 coats.
Wait at least 6 hours between coats.
-
-
Application instructions
-
Take appropriate measures to protect adjacent building elements and materials that should not come into contact with the product.
When coating continuous surfaces, only use materials with the same batch number as slight differences in colour, gloss and texture may occur.
Protect freshly coated surfaces from rain, direct sunlight, frost and condensation.
When coating continuous surfaces, only use materials with the same batch number.
-
-
Working tools / cleaning
-
Brush, surface brush, lamb's wool roller
-
Clean tools, equipment and any splashed material immediately with water while still fresh.
-
-
Storage / shelf life
-
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.
-
-
Usage
-
Approx. 0.1 - 0.15 l/m² per coat
-
Application rates may vary depending on the condition of the surface.
Apply to a large enough trial area to determine the precise amount required.
-
-
General information
-
Current regulations and legal requirements must be taken into account and deviations from these must be agreed separately.
Always set up a trial area/trial areas first.
-
-
Disposal instructions
-
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
-
-
Safety / regulations
-
For further information on the safety aspects of transporting, storing and handling the product and on disposal and environmental matters, please see the current Safety Data Sheet.
-
