ACC H : Accelerator for epoxy resins

Article No. 129583

ACC H

Accelerator for epoxy resins

Product variants

Downloads & documents

product.brochures.loading

1C on delivery

Density (20°C) 0.97 g/cm³

The stated values represent typical product characteristics and are not to be construed as binding product specifications.

Product details Application Usage / application examples Notes

Application
As a general principle, higher temperatures will reduce and lower temperatures will increase the times stated.
Storage / shelf life
If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 12 months.

Application examples

Epoxy ST 100	Development of Shore D hardness at room temperature (approx. 22 °C) depending on the quantity of ACC H added
	no ACC H	+ 2% by mass ACC H	+ 4% by mass ACC H
4 hours	0	16	60
6 hours	12	41	71
8 hours	15	55	75

Epoxy OS Color	Development of Shore D hardness at room temperature (approx. 22 °C) depending on the quantity of ACC H added
	no ACC H	+ 2% by mass ACC H	+ 4% by mass ACC H
4 hours	0	17	62
6 hours	8	50	76
8 hours	19	63	79

General information
Unless otherwise specified, all of the values and application rates given above have been determined under laboratory conditions (20 °C). Slight deviations from these values may arise if the product is worked with on site.

Use of the accelerator results in a shorter processing time. Depending on the quantity used, there may be problems with adhesion, trowel marks or spiked roller marks on the surface.

Properties such as impact resistance, crack bridging, UV stability and early water resistance are negatively affected.

When applying to continuous surfaces, the material should always have the same quantity of accelerator to ensure uniform colour.

Not for use to accelerate other epoxy resin systems since system incompatibilities cannot be ruled out.

Further notes on working, system construction and maintenance of the listed products can be found in the latest Technical Data Sheets and the Remmers system recommendations.
Disposal instructions
Larger quantities of leftover product should be disposed of in the original containers in accordance with the applicable regulations. Completely empty, clean containers should be recycled. Do not dispose of together with household waste. Do not allow to enter the sewage system. Do not empty into drains.
Safety / regulations
For professional users only!

Further information concerning safety during transport, storage and handling as well as on disposal and ecology can be found in the latest Safety Data Sheet.